Schnittstellen - USB-Datentransfer mit Satreceiver Marvin_0 - 29.05.2006, 21:46 Uhr Titel: USB-Datentransfer mit Satreceiver
Hallo!
Bin Linux-Neuling.
Ich möchte von meinem HUMAX-Satreceiver per USB2.0 Filme auf meinen PC übertragen. Ich probiere den Anschluß wie für eine externe USB-Festplatte. Ergebnis: Im Infozentrum erscheint unter USB-Geräte die aktive Schnittstelle (Philipps.. .). Es wird aber kein /dev/sda -Device angelegt! Die syslog-Ausgabe verstehe ich nicht. Ich bin auch nicht sicher ob scsi-Geräte überhaupt unterstütz werden. Ich kann also /dev/sda nicht mounten.
Der Kernel-update auf 2.6.16.16-kanotix-1 hat nichts gebracht!
Übrigens, falls ich die USB-Verbindung vor dem Booten schalte bleibt der PC hängen.
Weiter weiß ich nicht welches Dateisystem auf dem Satreceiver ist. Die Endung der Files ist aber .vid.
Bin für jeden Tipp dankbar.
Marvin
Kanotix 2005-4 Lite mit neuem Kernel
Athlon XP 2000+, Mainboard MSI KT2 Combo-L, MS 6764, Via Apollo KT266A Chipsatz
Anhang - Syslog-Ausgabe:
May 29 21:40:10 Aquado kernel: usb 1-1: new high speed USB device using ehci_hcd and address 3
May 29 21:40:10 Aquado kernel: usb 1-1: configuration #1 chosen from 1 choice
May 29 21:40:10 Aquado kernel: usbcore: registered new driver libusual
May 29 21:40:10 Aquado kernel: Initializing USB Mass Storage driver...
May 29 21:40:10 Aquado kernel: scsi0 : SCSI emulation for USB Mass Storage devices
May 29 21:40:10 Aquado kernel: usb-storage: device found at 3
May 29 21:40:10 Aquado kernel: usb-storage: waiting for device to settle before scanning
May 29 21:40:10 Aquado kernel: usbcore: registered new driver usb-storage
May 29 21:40:10 Aquado kernel: USB Mass Storage support registered.
May 29 21:40:15 Aquado kernel: Vendor: Model: ST380012ACE Rev: 4.06
May 29 21:40:15 Aquado kernel: Type: Direct-Access ANSI SCSI revision: 00
May 29 21:40:15 Aquado kernel: SCSI device sda: 156301489 512-byte hdwr sectors (80026 MB)
May 29 21:40:15 Aquado kernel: sda: Write Protect is off
May 29 21:40:15 Aquado kernel: sda: Mode Sense: 06 00 00 00
May 29 21:40:15 Aquado kernel: sda: assuming drive cache: write through
May 29 21:40:15 Aquado kernel: SCSI device sda: 156301489 512-byte hdwr sectors (80026 MB)
May 29 21:40:15 Aquado kernel: sda: Write Protect is off
May 29 21:40:15 Aquado kernel: sda: Mode Sense: 06 00 00 00
May 29 21:40:15 Aquado kernel: sda: assuming drive cache: write through
May 29 21:40:15 Aquado kernel: sda: sda1
May 29 21:40:15 Aquado kernel: sd 0:0:0:0: Attached scsi disk sda
May 29 21:40:15 Aquado kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
May 29 21:40:15 Aquado kernel: usb-storage: device scan complete
May 29 21:40:19 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3
May 29 21:40:42 Aquado hald[2359]: Timed out waiting for hotplug event 715. Rebasing to 717
May 29 21:40:49 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3
May 29 21:41:20 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3
May 29 21:42:20 Aquado last message repeated 2 times
May 29 21:42:50 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3
May 29 21:42:50 Aquado kernel: sd 0:0:0:0: SCSI error: return code = 0x50000
May 29 21:42:50 Aquado kernel: end_request: I/O error, dev sda, sector 156301488
May 29 21:42:50 Aquado kernel: Buffer I/O error on device sda, logical block 156301488
May 29 21:43:21 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3
May 29 21:43:51 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3
May 29 21:44:51 Aquado last message repeated 2 times
May 29 21:45:52 Aquado last message repeated 2 times
May 29 21:45:52 Aquado kernel: sd 0:0:0:0: SCSI error: return code = 0x50000
May 29 21:45:52 Aquado kernel: end_request: I/O error, dev sda, sector 156301488
May 29 21:45:52 Aquado kernel: Buffer I/O error on device sda, logical block 156301488
May 29 21:46:22 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3
May 29 21:46:53 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3
May 29 21:47:53 Aquado last message repeated 2 times
May 29 21:48:54 Aquado last message repeated 2 times
May 29 21:48:54 Aquado kernel: sd 0:0:0:0: SCSI error: return code = 0x50000
May 29 21:48:54 Aquado kernel: end_request: I/O error, dev sda, sector 156301488
May 29 21:48:54 Aquado kernel: Buffer I/O error on device sda, logical block 156301488
May 29 21:49:24 Aquado kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 3