| Autor |
Nachricht |
|
|
Titel: No sound!. CM-PCI driver problem
 Verfasst am: 17.06.2006, 11:41 Uhr
|
|
Anmeldung: 17. Jun 2006
Beiträge: 2
|
|
Hello:
I installed kanotix after using knoppix and I really like this secund more. But I have a problem. I installed kanotix-2006-easter-rc4 and my soundcard is not runnning. I have run alsaconf and it doesn't work too. My soundcard is a Max Sound Muse. Driver cm8738. If i run knoppix 5.0.1 it works well, but in kanotix not. This is what I see runing dmesg:
Linux version 2.6.16.5-kanotix-2 (root@Kanotix) (gcc version 4.0.3 (Debian 4.0.3-1)) #1 SMP PREEMPT Sat Apr 15 20:20:23 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bff8000 (ACPI data)
BIOS-e820: 000000000bff8000 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
On node 0 totalpages: 49136
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 45040 pages, LIFO batch:7
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fabb0
ACPI: RSDT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x0bff0000
ACPI: FADT (v001 AMIINT 0x00000011 MSFT 0x00000097) @ 0x0bff0030
ACPI: DSDT (v001 AMD75X IRONGATE 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x5008
Allocating PCI resources starting at 10000000 (gap: 0c000000:f3ff0000)
Built 1 zonelists
Kernel command line: Debian GNU/Linux, kernel 2.6.16.5-kanotix-2 Default vga=0x317 screen=1024x768 splash root=/dev/hda5 ro ramdisk_size=100000 lang=us apm=power-off nomce vga=0x317
Unknown boot option `2.6.16.5-kanotix-2': ignoring
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011c2000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 808.133 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 188288k/196544k available (3150k kernel code, 7708k reserved, 949k data, 320k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1618.70 BogoMIPS (lpj=3237403)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 923k freed
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0020 (from 0e00)
CPU0: AMD Athlon(tm) Processor stepping 02
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
Generic PHY: Registered new driver
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
pnp: 00:01: ioport range 0xde00-0xde03 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: ede00000-efefffff
PREFETCH window: e1c00000-e5cfffff
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Squashfs 2.2-r2 (released 2005/09/0 (C) 2002-2005 Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xe2000000, mapped to 0xcc880000, using 6144k, total 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0393
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7409: IDE controller at PCI slot 0000:00:07.1
AMD7409: chipset revision 7
AMD7409: not 100% native mode: will probe irqs later
AMD7409: 0000:00:07.1 (rev 07) UDMA66 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST320423A, ATA DISK drive
hdb: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: 16X10, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 40011300 sectors (20485 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 < hda5 hda6 > hda3
hdb: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.005.
libata version 1.20 loaded.
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: measuring checksumming speed
8regs : 1233.000 MB/sec
8regs_prefetch: 1095.000 MB/sec
32regs : 778.000 MB/sec
32regs_prefetch: 713.000 MB/sec
pII_mmx : 2206.000 MB/sec
p5_mmx : 2910.000 MB/sec
raid5: using function: p5_mmx (2910.000 MB/sec)
raid6: int32x1 306 MB/s
raid6: int32x2 277 MB/s
raid6: int32x4 248 MB/s
raid6: int32x8 221 MB/s
raid6: mmxx1 629 MB/s
raid6: mmxx2 1017 MB/s
raid6: sse1x1 610 MB/s
raid6: sse1x2 999 MB/s
raid6: using algorithm sse1x2 (999 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Apr 15 2006
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
Freeing unused kernel memory: 320k freed
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AMD Irongate chipset
agpgart: AMD 751 chipset with NVidia GeForce detected. Forcing to 1X due to errata.
agpgart: AGP aperture is 64M @ 0xe8000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:07.4[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:07.4: OHCI Host Controller
ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:07.4: irq 9, io mem 0xefffe000
input: PC Speaker as /class/input/input1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7007 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xccf22f00, 00:50:fc:ce:b5:09, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Unable to reserve I/O region #1:100@de00 for device 0000:00:0a.0
ACPI: PCI interrupt for device 0000:00:0a.0 disabled
C-Media PCI: probe of 0000:00:0a.0 failed with error -16
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ts: Compaq touchscreen protocol output
Adding 393552k swap on /dev/hda6. Priority:-1 extents:1 across:393552k
Capability LSM initialized
fuse init (API version 7.6)
NTFS driver 2.1.26 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs warning (device hda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows.
lan0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
lan0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
ACPI: Power Button (CM) [PWRB]
ACPI: Thermal Zone [THRM] (53 C)
lp0: using parport0 (interrupt-driven).
lp0: console ready
The problem is in bold. Can anyone tell me the way to have sound in my linux?
Thanks in advance. |
|
|
| |
|
|
|
 |
|
|
|
Titel: RE: No sound!. CM-PCI driver problem
Verfasst am: 17.06.2006, 12:01 Uhr
|
|
Team Member
Anmeldung: 03. Mai 2005
Beiträge: 1544
Wohnort: out there somewhere
|
|
| Hmm, I have onboard sound using the cm8738 chipset, you have a seperate card right, no onboard ?. What happens if you go in the bio's and turn plug & pray off ? |
_________________
h2's d-u script
h2's rdiff-backup script
|
| |
|
|
|
|
|
|
|
Titel: RE: No sound!. CM-PCI driver problem
Verfasst am: 17.06.2006, 18:09 Uhr
|
|
Team Member
Anmeldung: 06. Mai 2005
Beiträge: 3087
Wohnort: berlin
|
|
...and post output of these two commands please:
cat /proc/asound/cards
cat /proc/asound/modules
greetz
devil |
_________________
<<We are Xorg - resistance is futile - you will be axximilated>>
Host/Kernel/OS "devilsbox" running[2.6.19-rc1-git5-kanotix-1KANOTIX-2006-01-RC4 ]
CPU Info AMD Athlon 64 3000+ clocked at [ 803.744 MHz ]
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 18.06.2006, 12:42 Uhr
|
|
Anmeldung: 17. Jun 2006
Beiträge: 2
|
|
Hy again:
My soundcard is a non mother board one. It is separate. The commands devil says to execute don't give many information:
andres@amd800:~$ cat /proc/asound/cards
--- no soundcards ---
andres@amd800:~$ cat /proc/asound/modules
andres@amd800:~$
Coult it be a kernel problem? I've tryed installing a different kanotix kernel and it doesn't work too.
Any ideas?
Thanks |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 18.06.2006, 14:13 Uhr
|
|
Anmeldung: 09. Jan 2006
Beiträge: 1720
|
|
Sorry for clincking in.
Your seperate Sound-card does not get any IRQ
ACPI: PCI interrupt for device 0000:00:0a.0 disabled
C-Media PCI: probe of 0000:00:0a.0 failed with error -16
and is therefore disabled by the bios.
Linux can't access this card with a missing IRQ.
Make sure that your sound-card got an IRQ from the bios and the card will work |
|
|
| |
|
|
|
|
|
|
|
|
|
|
