28.03.2024, 23:09 UhrDeutsch | English
Hallo Gast [ Registrierung | Anmelden ]

Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
Autor Nachricht
Marvin_0
Titel: USB-Storage Verbindungsabbruch-Reset  BeitragVerfasst am: 02.02.2007, 20:41 Uhr



Anmeldung: 24. Apr 2006
Beiträge: 3

Hallo!

Bin Linux-Neuling.
Ich möchte von meinem HUMAX-Satreceiver per USB2.0 Filme auf meinen PC übertragen. Ich probiere den Anschluß wie für eine externe USB-Festplatte. Die Festpaltte wird auch erkannt, aber die Verbindung wird abgebrochen! Siehe Anhang: Auszug messages, dmesg und lsmod.
Mit meiner älteren Kanotix-Installation (Kernel 2.6.10-kanotix-Cool gelingt eine Verbindung, allerdings langsam mit 1 MB/sec. Die Festpaltte wird dabei automatisch unter /mnt/sda1 eingebunden.
Übrigens, falls ich die USB-Verbindung vor dem Booten schalte bleibt der PC hängen.
Das Motherboard unterstütz alle 6 USB-Ports mit USB 2.0.

Bin für jeden Tipp dankbar.

Marvin

Kanotix 2005-4 Lite mit Kernel 2.6.18.1-kanotix-1
Athlon XP 2000+, Mainboard MSI KT2 Combo-L, MS 6764, Via Apollo KT266A Chipsatz

Anhang
dmesg
lsmod
messages - Meldungen nach USB Verbindung

#dmesg

00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: AMD Athlon(tm) XP 2000+ stepping 01
Total of 1 processors activated (3336.08 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by vt8235 PM
PCI quirk: region 0400-040f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
Generic PHY: Registered new driver
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dde00000-dfefffff
PREFETCH window: c5d00000-d5cfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xc8000000, mapped to 0xf0880000, using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:c060
vesafb: pmi: set display start = c00cc0a5, set palette = c00cc12a
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: Unable to derive IRQ for device 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y160P0, ATA DISK drive
hdb: Maxtor 6Y080P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hdb: cache flushes supported
hdb: hdb1 < hdb5 hdb6 >
hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 2.00 loaded.
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 638 MB/s
raid6: int32x2 639 MB/s
raid6: int32x4 461 MB/s
raid6: int32x8 470 MB/s
raid6: mmxx1 1326 MB/s
raid6: mmxx2 2161 MB/s
raid6: sse1x1 1276 MB/s
raid6: sse1x2 2061 MB/s
raid6: using algorithm sse1x2 (2061 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 3053.000 MB/sec
raid5: using function: pIII_sse (3053.000 MB/sec)
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.4 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
EDAC MC: Ver: 2.0.1 Oct 17 2006
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Suspend2 Core.
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Replacing swsusp.
Suspend2 2.2.8: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image.
Suspend2 2.2.8: Resume2 parameter is empty. Suspending will be disabled.
Suspend2 2.2.8: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 312k freed
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: PC Speaker as /class/input/input1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 169
eth0: VIA Rhine II at 0xdffffc00, 00:10:dc:99:9f:52, IRQ 169.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 23
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 177, io base 0x0000ec00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.3, from 5 to 1
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:10.3: irq 177, io mem 0xdffffd00
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
PCI: Setting latency timer of device 0000:00:11.5 to 64
usb 1-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 193
saa7146: found saa7146 @ mem f0c7ce00 (revision 1, irq 193) (0x13c2,0x100f).
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
adapter has MAC addr = 00:d0:5c:24:21:39
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3
usb 1-1: configuration #1 chosen from 1 choice
DVB: registering frontend 0 (ST STV0299 DVB-S)...
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1 across:1052248k
Capability LSM initialized
fuse init (API version 7.7)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
lan0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports 16 throttling states)
lp0: using parport0 (interrupt-driven).
lp0: console ready
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9629 Wed Nov 1 19:30:07 PST 2006
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new driver libusual
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Model: ST380012ACE Rev: 4.06
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 156301489 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 06 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 156301489 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 06 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
sd 0:0:0:0: SCSI error: return code = 0x00050000
end_request: I/O error, dev sda, sector 156301488
Buffer I/O error on device sda, logical block 156301488
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
sd 0:0:0:0: SCSI error: return code = 0x00050000
end_request: I/O error, dev sda, sector 156301488
Buffer I/O error on device sda, logical block 156301488
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
sd 0:0:0:0: SCSI error: return code = 0x00050000
end_request: I/O error, dev sda, sector 156301488
Buffer I/O error on device sda, logical block 156301488
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
usb 2-2: reset high speed USB device using ehci_hcd and address 3
sd 0:0:0:0: SCSI error: return code = 0x00050000
end_request: I/O error, dev sda, sector 156301488
Buffer I/O error on device sda, logical block 156301488




#lsmod:
Module Size Used by
usb_storage 65728 2
libusual 15888 1 usb_storage
nvidia 4704180 22
lp 11016 0
video 14468 0
thermal 11912 0
processor 24264 1 thermal
fan 4484 0
container 4224 0
button 6032 0
battery 8836 0
ac 4740 0
nls_cp437 6656 2
fuse 37268 0
capability 4360 0
commoncap 6400 1 capability
usblp 12288 0
snd_seq_dummy 3716 0
snd_seq_oss 29568 0
snd_seq_midi 7328 0
snd_seq_midi_event 7168 2 snd_seq_oss,snd_seq_midi
snd_seq 46672 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
i2c_viapro 8596 0
parport_pc 36196 1
parport 31432 2 lp,parport_pc
psmouse 35208 0
serio_raw 6276 0
budget_ci 14080 0
lnbp21 2944 1 budget_ci
tda1004x 14980 1 budget_ci
budget_core 9348 1 budget_ci
saa7146 15112 2 budget_ci,budget_core
snd_via82xx 23320 0
ttpci_eeprom 3200 1 budget_core
stv0299 10376 1 budget_ci
dvb_core 70568 3 budget_ci,budget_core,stv0299
via_ircc 19732 0
ehci_hcd 29960 0
uhci_hcd 21000 0
gameport 12296 1 snd_via82xx
snd_ac97_codec 86304 1 snd_via82xx
snd_ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 39456 0
irda 112952 1 via_ircc
crc_ccitt 2944 1 irda
usbcore 107908 6 usb_storage,libusual,usblp,ehci_hcd,uhci_hcd
8250_pnp 9472 0
8250 21828 1 8250_pnp
serial_core 17792 1 8250
stv0297 7552 1 budget_ci
snd_mixer_oss 14720 1 snd_pcm_oss
via_rhine 21640 0
i2c_core 17792 9 nvidia,i2c_viapro,budget_ci,lnbp21,tda1004x,budget_core,ttpci_eeprom,stv0299,stv0297
evdev 8704 0
mii 5632 1 via_rhine
snd_pcm 66052 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 19588 2 snd_seq,snd_pcm
snd_page_alloc 8456 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7680 1 snd_via82xx
snd_rawmidi 20000 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 7308 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd 42852 11 snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
shpchp 32932 0
via_agp 8832 1
agpgart 26572 2 nvidia,via_agp
pcspkr 3584 0
pci_hotplug 28488 1 shpchp
soundcore 8288 1 snd


#messages
#letze Zeilen, USB nach dem Starten von Kanotix geschaltet

...
Feb 2 19:52:57 Aquado kernel: nvidia: module license 'NVIDIA' taints kernel.
Feb 2 19:52:57 Aquado kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
Feb 2 19:52:57 Aquado kernel: NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9629 Wed Nov 1 19:30:07 PST 2006
Feb 2 19:52:57 Aquado kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Feb 2 19:52:57 Aquado kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Feb 2 19:52:57 Aquado kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Feb 2 19:53:14 Aquado kernel: usb 2-2: new high speed USB device using ehci_hcd and address 3
Feb 2 19:53:14 Aquado kernel: usb 2-2: configuration #1 chosen from 1 choice
Feb 2 19:53:14 Aquado kernel: usbcore: registered new driver libusual
Feb 2 19:53:14 Aquado kernel: Initializing USB Mass Storage driver...
Feb 2 19:53:14 Aquado kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Feb 2 19:53:14 Aquado kernel: usbcore: registered new driver usb-storage
Feb 2 19:53:14 Aquado kernel: USB Mass Storage support registered.
Feb 2 19:53:19 Aquado kernel: Vendor: Model: ST380012ACE Rev: 4.06
Feb 2 19:53:19 Aquado kernel: Type: Direct-Access ANSI SCSI revision: 00
Feb 2 19:53:19 Aquado kernel: SCSI device sda: 156301489 512-byte hdwr sectors (80026 MB)
Feb 2 19:53:19 Aquado kernel: sda: Write Protect is off
Feb 2 19:53:19 Aquado kernel: SCSI device sda: 156301489 512-byte hdwr sectors (80026 MB)
Feb 2 19:53:19 Aquado kernel: sda: Write Protect is off
Feb 2 19:53:19 Aquado kernel: sda: sda1
Feb 2 19:53:19 Aquado kernel: sd 0:0:0:0: Attached scsi disk sda
Feb 2 19:53:19 Aquado kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 2 19:53:50 Aquado kernel: usb 2-2: reset high speed USB device using ehci_hcd and address 3
Feb 2 19:54:20 Aquado kernel: usb 2-2: reset high speed USB device using ehci_hcd and address 3
Feb 2 19:55:21 Aquado last message repeated 2 times
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Beiträge vom vorherigen Thema anzeigen:     
Gehe zu:  
Alle Zeiten sind GMT + 1 Stunde
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
PNphpBB2 © 2003-2007 
 
Deutsch | English
Logos and trademarks are the property of their respective owners, comments are property of their posters, the rest is © 2004 - 2006 by Jörg Schirottke (Kano).
Consult Impressum and Legal Terms for details. Kanotix is Free Software released under the GNU/GPL license.
This CMS is powered by PostNuke, all themes used at this site are released under the GNU/GPL license. designed and hosted by w3you. Our web server is running on Kanotix64-2006.