kanotix.com

Hardware - SSD installation

fuzetea - 11.10.2019, 09:23 Uhr
Titel: SSD installation
Hi

Kanotix can not be installed into SSD from USB stick because it is not listed in acritox installer.
My hardware:
MOBO Gigabyte B450 aorus m
AMD Ryzen 3
HDD Seagate with Kanotix installed
SSD Kingston A2000 M.2

The SSD is visible in BIOS and in terminal with fdisk -l as /dev/nvme0n1

How should the installtion be succesful?
Antonius - 11.10.2019, 21:04 Uhr
Titel: RE: SSD installation
Please give us more information:

1. What´s the output of "fdisk -l" ?
2. Did you boot from the USB-Stick in Legacy Mode or in UEFI (https://kanotix.com/index.php?module=pnWikka&tag=UEFIornotUEFIEN) ?
3. Did you prepare the SSD as described here: https://kanotix.com/index.php?module=pnWikka&tag=UEFIornotUEFIEN ?
4. At which stage does the Acritox Installer not list the SSD https://kanotix.com/index.php?module=pnWikka&tag=KanotixInstallationEN?
Already at stage 2 (partioning)? https://kanotix.com/files/installer/en/insten03.png
Or at stage 3 (Partition mapping)? https://kanotix.com/files/installer/en/insten05.png
fuzetea - 12.10.2019, 10:37 Uhr
Titel:
1.fdisk -l
Code:

Disk /dev/nvme0n1: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Disk model: KINGSTON SA2000M8250G                   
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 76D9E522-37A0-4A58-AA58-95F7941C7D79

Device             Start       End   Sectors   Size Type
/dev/nvme0n1p1      4096    618495    614400   300M EFI Syste
/dev/nvme0n1p2    618496 469937125 469318630 223.8G Linux fil
/dev/nvme0n1p3 469937126 488392064  18454939   8.8G Linux swa


Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Disk model: ST3500418AS     
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x78a602b4

Device     Boot    Start       End   Sectors   Size Id Type
/dev/sda1           2048  32770047  32768000  15.6G 82 Linux
/dev/sda2       32770048 976773119 944003072 450.1G 83 Linux




Disk /dev/zram0: 1.7 GiB, 1829785600 bytes, 446725 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram1: 1.7 GiB, 1829785600 bytes, 446725 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

2.UEFI
3.No
4.Partitioning

Thanks Smilie
Antonius - 12.10.2019, 18:01 Uhr
Titel:
Sorry, but I do not have any idea, how to fix your problem.

There´ s one thing you may try still:

In the "Kanotix Factoids" there´s a patch mentioned for the Acritox Installer regarding NVME:

Quit the Acritox installer (if it´s running)

Code:
cd /usr/share/acritoxinstaller && wget -qO- http://kanotix.com/files/fix/installer/0001-added-listing-of-NVME-partitions-disks.patch|sudo patch -p2


You may do this as root and omit the "sudo".
After this fix start the Acritox Installer and it may now recognize your SSD.

Good luck!
fuzetea - 12.10.2019, 19:43 Uhr
Titel:
Thank you.
Kano - 13.10.2019, 06:46 Uhr
Titel:
This patch is included for several years. Are the partitions already formatted? Ext4 for the install partition, FAT32 for the EFI partition.
fuzetea - 13.10.2019, 09:53 Uhr
Titel:
The patch was unfamiliar to me.
The now visible partitions are after installation of Neptune OS (which detected the SSD)
Alle Zeiten sind GMT + 1 Stunde
PNphpBB2 © 2003-2007